Best Practice Checklists

An exclusive publication of

Essentials every leader should understand about IT


Issue 7 – Wi-Fi Deployment and Security

Wi-Fi Deployment and Security — download the printable PDF

Download this article as a PDF

Click Here to Download
Contact Us

Wi-Fi Deployment & Security

The one part of your network a stranger can reach from the parking lot

Consumer wireless gear is easy to buy and easy to plug in, and that ease is exactly what leads businesses to underestimate it. A wireless signal does not stop at the walls, and the same network can quietly underperform for years, or quietly expose the company for just as long. Both outcomes are decided at deployment, not by the box the equipment came in. The situations below are more common than most organizations realize.

When it goes wrong

Not every network needs enterprise hardware in every corner, and a modest setup is often an acceptable, deliberate choice. The point is not to alarm. It is to make sure the exposures below are ones the organization understands and accepts, rather than ones it never saw.

The Evil Twin in the Lot

A laptop is set to reconnect to known networks on its own. Someone nearby runs a device that broadcasts the same network name at higher power. The laptop trusts the stronger signal and connects, and the operator simply accepts whatever it sends.

Traffic and credentials pass through a stranger’s equipment.

The Guest Who Reaches the Server

A visitor’s laptop, or an employee’s personal phone, joins a wireless network that is bridged to the main company network. The device is unmanaged, and no one can vouch for what it is carrying.

An unmanaged device becomes a pivot onto the company LAN.

The Access Point Nobody Approved

An employee wants better signal in a back office and plugs a consumer access point into a live wall jack. It arrives with good intentions, no encryption discipline, and no oversight.

An open door onto the network, opened from the inside.

The Network That Just Feels Slow

No site survey was done. Access points were placed by guesswork and left on default channels that compete with the neighbors. Calls drop, transfers crawl, and everyone assumes that is simply how Wi-Fi behaves.

Money is spent, and the network underperforms every day.

The common thread

None of these is a story about a faulty product. Each traces back to decisions made once, at deployment, about how the network was surveyed, placed, segmented, encrypted, and governed, and then rarely revisited.

A wireless network reaches past your walls whether you planned for it or not. Whether that reach becomes an exposure is decided by how the network is deployed and secured, not by the equipment on the box. That is the entire point of this issue.

What to Ask Your IT Manager or Provider

and how to know if the answers are good ones

You do not need to administer a wireless network to oversee one. You need to know what to ask. A fuller primer on encryption, site surveys, and the terms your IT team will use is provided at the end, for those who want the detail. First, the part that matters: run the checklist below with your IT professional. If any item is not marked green, it may warrant a closer look.

Requirements & Equipment Analysis

✓
–
?
Was a professional requirements analysis performed before any wireless equipment was selected? The right solution depends on details that are easy to skip: how many devices each access point must support at once, antenna and power requirements, signal-tuning capability, how the equipment interoperates with the firewall and core network, and whether a single set of credentials must work across multiple sites. Equipment chosen without this analysis often has to be worked around later.

Site Survey & Placement

✓
–
?
Was a professional site survey conducted before structured cabling was installed and access points were mounted? Placement decides performance, and closer is not always better. Building materials such as plaster over metal lath, concrete, mirrored glass, and steel framing all block or distort signal, and access points sited too near one another can interfere. A survey establishes where coverage will actually hold before anything is cabled in.

Tuning & Optimization

✓
–
?
Has the network been tuned for its environment rather than left on factory defaults? Professional equipment can be adjusted to avoid interference from neighboring networks sharing the same channels, and the different frequency bands trade range against the ability to pass through walls. A network that was never tuned often underperforms in ways that look like a hardware fault but are not.

Enterprise-Class, Controller-Based Solution

✓
–
?
Is the network built on enterprise-grade, controller-based equipment rather than a collection of standalone consumer units? A controller, on premises or in the Cloud, provides centralized control, more granular security and tuning, better visibility into anomalies, and a simple way to push critical updates. It also helps catch a single misconfigured access point before it becomes an exposure.

Current-Generation Encryption

✓
–
?
Is the wireless network using the current generation of encryption its hardware supports? WPA3, in its WPA3-Enterprise or WPA3-Personal form, is now the current standard and is recommended wherever equipment supports it; on the 6 GHz band used by Wi-Fi 6E and Wi-Fi 7, permitted security modes include WPA3 or Enhanced Open (OWE), depending on the network’s purpose; WPA2 is not permitted. WPA2-Enterprise with AES remains an acceptable minimum on older 2.4 and 5 GHz hardware, but WPA2 is no longer the latest generation. WPA2-Personal (often labeled WPA2-PSK) will typically pass a casual audit yet remains more exposed to password attacks, and the older WEP and WPA protocols should be treated as obsolete. No wireless network is ever entirely secure, so it is recommended that organizations run the most current encryption their equipment supports.

Segmentation from the Corporate Network

✓
–
?
Is wireless access segmented from the corporate network (the LAN) by a firewall? Wireless traffic can be exposed to interception, man-in-the-middle attempts, and denial-of-service traffic, so it is generally recommended that wireless devices reach internal resources only through a VPN client or an approved remote-access solution, rather than sitting directly on the LAN.

Guest and Personal-Device Network

✓
–
?
Is there a separate, Internet-only network for guests and for employee-owned devices that are not authorized on the company network? Personal phones and laptops cannot be assumed to be patched, managed, or free of malware. Keeping them on their own segment removes an easy pivot point onto company-owned equipment.

Rogue and Unauthorized Access Points

✓
–
?
Are there policies and technical controls to prevent unauthorized access points from being added to the network? Well-meaning employees have been known to plug consumer access points into live jacks for their own convenience, and someone with physical access to an open port could do the same with intent. Either creates exposure the organization did not choose. Controller-based systems can also detect rogue access points broadcasting nearby.

No Automatic Connections

✓
–
?
Are company-owned devices configured not to connect or reconnect to wireless networks automatically? Automatic reconnection is convenient, but it is exactly what an evil-twin attack relies on: a rogue access point broadcasting the company network name at higher power, which a device then trusts as the closer, legitimate network. Disabling it is inconvenient and, for sensitive environments, worth it.

Default Passwords and Rotation

✓
–
?
Have all default passwords been removed from access points, controllers, and switches, and are administrative and user passwords changed on a defined schedule? Default credentials left in place are among the simplest and most damaging oversights at deployment. Wireless passwords should also meet the organization’s standards for length and complexity.

Wireless Flood Protection

✓
–
?
Is wireless flood protection enabled? Though less common, flood attacks disrupt service by rapidly and repeatedly attempting to authenticate to access points, often using spoofed device identifiers so each attempt appears to come from a different, legitimate device. Enterprise equipment can be configured to absorb and blunt this.
A short glossary: the terms your IT will usePlain definitions, for whoever wants them. Optional.+

WPA3, WPA3-Enterprise, WPA3-Personal

WPA3 is the current generation of Wi-Fi encryption, the successor to WPA2. WPA3-Enterprise authenticates each user against a central directory (using 802.1X and a RADIUS server) and suits organizations; it also offers an optional 192-bit high-security mode. WPA3-Personal uses a single shared passphrase but strengthens it with a method called SAE (Simultaneous Authentication of Equals), which resists the offline password-guessing that affects WPA2-Personal.

WPA2, WPA2-Enterprise, WPA2-PSK

WPA2 is the prior generation and still widely deployed. WPA2-Enterprise with AES remains an acceptable minimum on older hardware. WPA2-PSK (a shared password) will often pass a casual audit but is more exposed to eavesdropping. The older WEP and WPA protocols are obsolete.

Wi-Fi 6, 6E, and 7, and the 6 GHz band

These are recent generations of Wi-Fi. Wi-Fi 6E and suitable Wi-Fi 7 hardware can use the 6 GHz band. Certified 6 GHz operation uses WPA3 or Enhanced Open (OWE), with Protected Management Frames; WPA2 and traditional unencrypted open security are not permitted. The security mode still needs to suit the organization’s users and access requirements.

Controller-based network

A design in which access points are managed centrally by a controller (on site or in the Cloud) rather than each being configured on its own. It is the basis of most professional deployments.

Site survey

A structured assessment of a space that maps where signal will reach and where it will be blocked, used to decide how many access points are needed and where to place them.

Evil twin

A rogue access point that impersonates a legitimate network by broadcasting the same name, usually at higher power, to lure devices into connecting to it.

Going deeper: what shapes a wireless deploymentThe finer points that separate a network that works from one that only looks like it does. Optional.+

The Site Survey

For anything beyond a small space, the recommended practice is to obtain professional floor plans (CAD is ideal, PDF is workable), import them into site-survey software, tag the materials and features that impede signal, and model each device’s broadcast strength to produce a formal report. That report, not guesswork, should drive where access points are placed.

Fictional office floor plan showing three access-point markers and a green-to-red coverage heatmap. This is an illustration, not measured survey data.
Fictional Wi-Fi coverage example, not a measured site survey. Actual coverage must be evaluated and measured in the intended environment. Select the image to view it at full size.

Why Placement Is Not Obvious

Closer is not always better. Access points positioned too near one another, or too near the devices they serve, can degrade performance. Wireless is also two-way: strong signal from the access point does not help if the device cannot broadcast back with comparable strength. Where mesh equipment must be used in place of hardwired access points, expect some performance loss each time one access point is chained to another to extend range. Hardwired access points remain the preferred approach.

Frequencies and Tuning

Higher-frequency Wi-Fi bands often provide more available spectrum and wider channel options, but they do not make radio waves travel faster. Range and wall penetration generally become more challenging at higher frequencies. Actual data rates also depend on channel width, modulation, spatial streams, interference, and client capabilities. Tuning channels and transmit power to the building is essential.

Segmentation and Access

Because wireless is exposed to interception, man-in-the-middle attempts, and denial-of-service traffic, it is generally kept separate from the corporate LAN, with access to internal resources brokered through a VPN or an approved remote-access solution. Guest and personal devices belong on their own Internet-only segment.

Download the printable PDF

To review how your organization’s wireless network measures up against these practices, it is recommended that you consult your Sandbox Technologies Engineer, Consulting CIO, or Account Manager. Not a client yet? Contact us here to get started.

Contact Sandbox Technologies for a free, no-obligation consultation.

Headquartered in Los Angeles. Serving clients nationwide and internationally since 1997.

Nationwide (Toll-Free)

877-930-8324

Los Angeles

424-207-5130

Support Helpdesk

424-207-5140

    By submitting this form you are confirming that you have read and agree to our Privacy Policy

    * NOTE: Hardware purchase requests submitted via this form will not be honored. Hardware sales are facilitated in support of established customer accounts only.